- ADD:Wenhua Road Sanquan
- Road Zhengzhou China
type:hotizontal mixing machine
Main Power:5.5 KW three phases
used for: mixing fish feed,chicken feed,cattle feed,poultry feed
raw materials:grains,manure,straw meal,alfalfa,bone meal etc
Feed mixing machine is a key step in feed pellet production plant due to its direct influence on quality of feed pellets. Feed mixer machines are performed to evenly blend various kinds of raw material powder and sometimes liquid adding equipments is necessary to be used to add liquid nutrition ingredients for better mixing. After highly mixing, the materials prepare the way for the production of high quality feed pellets. Our specially customized mixing machines enjoy popularity in the market.
1. It applies to mix various powdery material or mix powdery material with liquid. This feed mixing machine is especially used for mixing raw materials for making feed pellets.
2. Under the feasibility factors, the size and density of particle do not affect mixed result, for sticky materials, it still has a good mixed result.
3. Horizontal mixing process reduces the destruction of fragile materials.
4. This feed mixing machine featured with single axis connects two-layer ribbon and mixing materials in different directions. Materials can be fully mixed and mixing uniformity must be improved.
5. It adopts latest rotor structure. The clearance between rotor and casing is adjustable to virtually zero, it can reduces residual materials effectively.
6. Overall structure is more reasonable, beautiful appearance, easy to operation and convenient to maintain.
7. This ribbon feed mixing machine features with compact structure, small area coverage, resistant to wear, low energy consumption, long service life,etc. It is a best choice for you.
8. Suitable for mixing raw materials in feed pellets mill, chemical plants,etc.
♦ After starting the mixer, check its running direction timely to avoid turning reversely.
♦ The load of the mixer must not exceed the effective volume.
♦ After using for 15 days for the first time, release the lubricant oil and clean the oil tank; change the lubricant oil in the speed reducer every three months, and fill grease to the bearing every two months.
♦ Minor repair of the mixer is needed after 1800 hours’ normal running, mainly to check the lubrication point or replace the wearing parts; overhaul is needed after 4000 hours’ normal running, mainly to disassemble to check and clean all the components, replace or rectify all the wearing parts and standard parts.